Enhanced Anti-pollution Reverse Osmosis Composite Membrane - Hydranautics PROC10
1.Hydranautics PROC10 Performance Parameters
Water Production:10,500 gpd (39.7 m3/d)
Desalination Rate:
Test Conditions:
Nominal： 99.75%
Minimum：99.6%
Solution：2000 mg/L NaCl
Pressure：225 psi (1.55 MPa)
Temperature：77 。F (25 。C)
Recovery Rate： 15%
pH：6.5 - 7.0
*Performance parameters are obtained when the system is running stably for 10 minutes. Actual test conditions may not be completely identical to the above data. In this case, the performance parameters are standardized based on standard conditions. The deviation range of water production is within ±15%.
2.Hydranautics PROC10 General Product Description
Structure: Roll-type
Membrane Material: Aromatic polyamide
Effective Membrane Area**: 400 ft2 (37.2 m2)
Feed Water Spacer: 34 mil (0.86 mm)
Packaging: Each membrane element is packaged with a concentrate seal ring, a connection adapter, and matching O-rings. The membrane element is sealed in a polyethylene plastic bag with a solution of sodium bisulfite at a concentration not exceeding 1.0% as a protective fluid, and then packaged in a cardboard box.
3.Hydranautics PROC10 Membrane Element Dimensions
A, inches (mm) | B, inches (mm) | C, inches (mm) |
40.0 (1016) | 7.89 (200) | 1.125 (28.6) |
4.Hydranautics PROC10 Product Usage and Limitations
Maximum Operating Pressure: 600 psig (4.14 MPa)
Maximum Feed Water Chlorine Concentration: < 0.1mg/L
Maximum Feed Water Temperature: 113 。F (45 。C)
Operating pH Range: 2-11
Cleaning pH Range: 1-13
Maximum Feed Water Turbidity: 1.0 NTU
Maximum Feed Water SDI15: 5.0
Maximum Feed Water Flow Rate: 90 gpm (20 m3/h)
Minimum Concentrate Flow Rate: 12 gpm (2.7 m3/h)
Maximum Pressure Drop per Membrane Element: 15 psi (0.10 MPa)
5.Application Fields of Hydranautics Reverse Osmosis Membrane PROC10
The application fields of Hydranautics Reverse Osmosis Membrane PROC10 are very extensive, mainly including the following aspects:
1. Drinking water treatment: PROC10 reverse osmosis membrane can effectively remove suspended solids, color, odor, heavy metals, bacteria, viruses and other harmful substances in water, providing clean and safe drinking water.
2. Industrial wastewater treatment: Wastewater generated during industrial production may contain various harmful substances and pollutants. PROC10 reverse osmosis membrane can be used to treat these wastewater to meet emission standards or requirements for reuse.
3. Seawater desalination: PROC10 reverse osmosis membrane also has important applications in the field of seawater desalination. It can remove salts and impurities from seawater to obtain desalinated water that can be used for irrigation, industrial water or drinking water.
4. Food and beverage processing: In the production of food and beverages, pure water is needed as a raw material. can be used for water pretreatment to ensure product quality and safety.
5. Pharmaceutical manufacturing: The requirement for water quality is very strict in the pharmaceutical process. PROC10 reverse osmosis membrane can be used to prepare high-purity water to meet the needs of pharmaceutical manufacturing and cleaning processes.
6. Electronics industry: In the field of electronic component manufacturing, ultrapure water is needed for cleaning and manufacturing processes. PROC10 reverse osmosis membrane can provide high-purity water that meets the requirements.
In addition, PROC10 reverse osmosis membrane is also applied in urban sewage reuse, agricultural irrigation, laboratory water, swimming pool water, and other water treatment fields, such as power plants, steel, textiles, hotels, catering industries, etc., to meet various water needs.
Please note that the above information may vary due to technological updates and market changes. If you have questions about specific application fields, it is recommended to consult Hydranautics or relevant technical experts to obtain the most accurate information.